Direct Line:
1-330-476-2422
Quotes@ApexScales.com
Bench Scales Balance Scales Price Computing Scales Floor Scales Onboard Mining Scales Drum Scales Cardinal-Detecto Washdown Scales
Crane Scales Platform Scales Laboratory Scales Forklift Scales Onboard Scales Logging Scales Doran Scales Wireless Scales
Batching Scales Stainless Steel Scales Washdown Bench Scales Mechanical Scales Truck Axle Scales Skidsteer Scales Intercomp Scales Weigh in Motion Scales
Control Systems Shipping Scales Load Cells & Printers Medical Scales Small Plane Scales Wheel Loader Scales Precisa Scales Wheel Weigher Scales
Intrinsically Safe Stainless Steel Scales Refuse Trucks Scales Tipping Body Scales Dump Trucks Scales Livestock Scales Roll-off Truck Scales
.
Vulcan Straight Chassis Fixed Body Truck Scales

 

Fixed Body Trucks
 
System Accuracy: Typically
+/- 1% of full scale load or better.
Spreaders & Tank Trucks
Accurate and reliable payload measurement is an important element of profitability and operating safety in bulk hauling. Whether for municipal, county, state or private operations, Vulcan on-board scale systems allow optimum, safe use of a truck’s payload capacity-both for maximizing loads and preventing the liabilities of overloading.
Vulcan On-Board Scales can be installed on all types of vehicles including, hook lifts, logging trucks, flatbed trailers, chip trailers, front loaders, rear loaders, side loaders, roll-offs, transfer trailers, and many other commercial vehicles requiring scales. Axle group weights, payload weights, gross vehicle weights, and individual pick-up and drop-off weights can be measured using the Vulcan On-Board Scale System.
Vulcan On-Board Scales can be installed on all types of vehicles including, hook lifts, logging trucks, flatbed trailers, chip trailers, front loaders, rear loaders, side loaders, roll-offs, transfer trailers, and many other commercial vehicles requiring scales. Axle group weights, payload weights, gross vehicle weights, and individual pick-up and drop-off weights can be measured using the Vulcan On-Board Scale System.
The Vulcan On-Board Scale System consists of:
• Load Cells or Air Sensors - to sense load or air pressure.
• VSL Vulcoders - to convert the signals from the sensors to weight and communicate with the meter.
The new Vulcan Single Line (VSL) technology is a revolutionary way that the V600 Meter communicates with each VSL Vulcoder. VSL technology uses a single 2-wire cable to provide the communications between the meter and VSL Vulcoders. The single 2-wire communication cable sends power and set-up data to each VSL Vulcoder while receiving weight data from each VSL Vulcoder.
System Accuracy: Typically +/- 1% of full scale load or better.
Digital Graduations: 10, 20, 50 100 or 200 lbs/kgs
Displays: Total Truck Gross Weight, Net Payload Weight, Steering Axle Weight, Drive Axle Weight.
Note Displays: For other configurations, the channel weight may not be the actual axle group weights because some of the load is being shared by other axles. For short log and refuse trucks, the scales can indicate a weight on an axle group that should not be exceeded in order to keep the truck legal. Load the truck close to the legal maximum according to a certified platform scale. The number displayed on the channel of the meter corresponding to the axle group represents an approximate rear axle group weight and may be used as a reference weight to avoid exceeding the legal limit. This reference weight may be different from the weight shown on the certified platform scale display. Note: Channel "A" does not represent the steering axle weight when fully loaded.

V300 Series Meters:

  • Display: LED, variable brightness
    0.6” high characters
  • Cycle Speed: Variable, 1-9 seconds
  • Size: 8.0”W x 1.25”D x 3.5”H (including mounting bracket)
  • Resolution: 10, 20, 50, 100, or 200 lb or kg increments
  • Voltage required: 10 to 15.0 Vdc
  • Current Draw: less than 1 amp
  • Protection: Inline, 2 amp fast acting fuses and reverse voltage protection
  • Weight: less than 12 oz (including mounting bracket)

VSL Vulcoder:

  • Size: 5.0”W x 2.5”D x 1.5”H (one and two lead Vulcoders)
  • 2-Wire Communication Cable:
    • Vulcan designed special cable, urethane jacketed, remains flexible in cold water

  • 4-Wire Sensor Cable:
    • Vulcan designed special shielded cable, polyurethane jacketed, 4 conductor

  • Electronics: Environmentally sealed
The Vulcan V300 Series Electronics System combines the most advanced electronics with a user-friendly operation. The system works with existing Vulcan load cells and sensors. The V300 Series is ideal for applications requiring up to four channels, and for operators who wish to mix tractors and trailers.
  • Compact size allows the meter to be mounted almost anywhere
  • Uses Vulcan Single Line (VSL) technology
  • Unlimited mixing of trucks and trailers without any adjustment, just plug in and go
  • Automatically identifies and adjusts for different truck/trailer configurations
  • Select the two channel V320 or the four channel V340 meter depending on your application
  • Adjustable cycle time (between channels)
  • Brilliant display - large, red LEDs with 4 brightness setting for easy viewing inside/outside the cab
  • Simple operation and calibration
  • Lockout feature allows full operation of scales while safeguarding against accidental changing of calibration settings
  • Reduced wiring - a single 2 wire cable provides power and communication for all channels
  • Complete system troubleshooting including individual load cell diagnostics
  • V-300 series Spec Sheet
G-603 Bulk carrier Scale system -solo tankers
The Vulcan 6 load cell fixed body bulk carrier scale system is designed for fix mounted bulk carrier configurations such as solo tankers. The scale system measures gross vehicle and net payload weights, using proven technology to give you the reliability and accuracy you expect.
Ship Wt: 256 lbs. Estimated install time: 40 to 50 HOURS
Installable System: This item is non-refundable.
R-216B Fixed Body Scale System 6 Cells with Mounting Bracket
4-15" Load Cells (50,000lb Max w/ dead load)
The Vulcan fixed bulk carrier 4-cell body scale system with mounting brackets is designed to work with all fix mounted bodies and do not tip to dump or service. The scale system measures gross vehicle, net payload and individual commercial pick-up weights.
Ship Wt: 345 lbs.  Estimated install time: 30 to 40 HOURS
Installable System: This item is non-refundable.
R-206B Fixed Body Scale System 6 Cells with Mounting Bracket
6-15" Load Cells (75,000lb Max w/ dead load)
The Vulcan fixed bulk carrier 6-cell body scale system with mounting brackets is designed to work with all fix mounted bodies and do not tip to dump or service. The scale system measures gross vehicle, net payload and individual commercial pick-up weights.
Ship Wt: 345 lbs.  Estimated install time: 30 to 40 HOURS
Installable System: This item is non-refundable.
No more Overweight Fines: The expense of operating overloaded is already prohibitive in many regions and is becoming a serious issue nationwide. Enforcement is increasing and penalties are becoming more costly.

Eliminate Legal Liabilities: The potential costs to a hauler from lawsuits resulting from an accident involving an overloaded truck can be severe.

Ensure Operating Safety: Overloaded trucks have significantly impaired braking distances and cornering abilities, and are more likely to experience premature failures of truck components.

Cut Maintenance Costs: Hauling legal payloads reduces maintenance expense on springs, brakes and tires, and increases the operating lifetime of the truck and body.

Increase Driver Efficiency: Our on-board scales give your drivers the assurance of hauling legal. With scales, drivers finish trips more efficiently and faster with full, legal loads.

Installation times are estimates on first time installations only. Actual installation times are dependent on the skill level of the mechanic and number of mechanics, shop equipment, on the need to possibly relocate other equipment on the truck or trailer.
Bulk Carrier's Description Ship Wt Notice Price
Vulcan-G-603

Bulk Carrier Scale System:
(1) M32 V320 METER
(1) V25 VSL VULCODER - 6 LEAD
(6) L01 15" SUPER-BEAMS - END CONNECTOR
(6) H01 15" SUPER-BEAM MOUNTING KITS
(4) H02 15" SUPER-BEAM SPRING KITS

256 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan R-216B

Bulk Carrier Scale System: R-216B Fixed Body Scale System 4 Cells with Mounting Bracket
(1) M60A-C-16 V600 METER
(1) V24 VSL VULCODER - 4 LEAD
(1) C01 Cable 40' Orange Flex
(4) L01 15" SUPER-BEAMS - END CONNECTOR
(4) H01 15" SUPER-BEAM MOUNTING KITS
(2) H02 15" SUPER-BEAM SPRING KITS
(4) H05 Body Frame Bracket
(4) H06 Truck Frame Bracket
(4) H08 Fastner Kit

345 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan R-206B

Bulk Carrier Scale System: R-206B Fixed Body Scale System 6 Cells with Mounting Bracket
(1) M60A-C-16 V600 METER
(1) V24 VSL VULCODER - 4 LEAD
(1) C01 Cable 40' Orange Flex
(6) L01 15" SUPER-BEAMS - END CONNECTOR
(6) H01 15" SUPER-BEAM MOUNTING KITS
(2) H02 15" SUPER-BEAM SPRING KITS
(6) H05 Body Frame Bracket
(6) H06 Truck Frame Bracket
(6) H08 Fastner Kit

345 lbs. Installable System: This item is non-refundable. Call for Best Pricing

 

 

Product Menu

Apexscales.com
Direct Line - 1-330-476-2422
We record all calls for quality assurance.
CopyRight © All Rights Reserved
No Customer Data Stored on our Servers
Installable Systems/Parts/Made or Configured to order: Are NON-Refundable
Celebrating 30 years of Service in the Scale Industry.
sales@ApexScales.com
ApexEgroupLLC@gmail.com
Quotes@ApexScales.com