Direct Line:
1-330-476-2422
Quotes@ApexScales.com
Bench Scales Balance Scales Price Computing Scales Floor Scales Onboard Mining Scales Drum Scales Cardinal-Detecto Washdown Scales
Crane Scales Platform Scales Laboratory Scales Forklift Scales Onboard Scales Logging Scales Doran Scales Wireless Scales
Batching Scales Stainless Steel Scales Washdown Bench Scales Mechanical Scales Truck Axle Scales Skidsteer Scales Intercomp Scales Weigh in Motion Scales
Control Systems Shipping Scales Load Cells & Printers Medical Scales Small Plane Scales Wheel Loader Scales Precisa Scales Wheel Weigher Scales
Intrinsically Safe Stainless Steel Scales Refuse Trucks Scales Tipping Body Scales Dump Trucks Scales Livestock Scales Roll-off Truck Scales
.
Vulcan Dump & Trailer Truck Scales

 

System Accuracy: Typically
+/- 1% of full scale load or better.

Accurate and reliable payload measurement is an important element of profitability and operating safety in bulk hauling. Whether for municipal, county, state or private operations, Vulcan on-board scale systems allow optimum, safe use of a truck’s payload capacity-both for maximizing loads and preventing the liabilities of overloading.

Mix and match: Tractors & Trailers. Because calibration is store in the VSL Vulcoder for the tractor and the trailer. You can have and use any trailer with and tractor and the calibration will be correct.

ApexEgroup works hard to make things easy for you. We have developed our custom manuals and instruction for a faster and easier install and calibration.  Saving you time and money is just one of the benefits of making your purchase though ApexEgroup.

System Accuracy: Typically +/- 1% of full scale load or better.
Digital Graduations: 10, 20, 50 100 or 200 lbs/kgs
Displays: Total Truck Gross Weight, Net Payload Weight, Steering Axle Weight, Drive Axle Weight.

V300 Series Meters:

  • Display: LED, variable brightness
    0.6” high characters
  • Cycle Speed: Variable, 1-9 seconds
  • Size: 8.0”W x 1.25”D x 3.5”H (including mounting bracket)
  • Resolution: 10, 20, 50, 100, or 200 lb or kg increments
  • Voltage required: 10 to 15.0 Vdc
  • Current Draw: less than 1 amp
  • Protection: Inline, 2 amp fast acting fuses and reverse voltage protection
  • Weight: less than 12 oz (including mounting bracket)

VSL Vulcoder:

  • Size: 5.0”W x 2.5”D x 1.5”H (one and two lead Vulcoders)
  • 2-Wire Communication Cable:
    • Vulcan designed special cable, urethane jacketed, remains flexible in cold water

  • 4-Wire Sensor Cable:
    • Vulcan designed special shielded cable, polyurethane jacketed, 4 conductor

  • Electronics: Environmentally sealed
The Vulcan V300 Series Electronics System combines the most advanced electronics with a user-friendly operation. The system works with existing Vulcan load cells and sensors. The V300 Series is ideal for applications requiring up to four channels, and for operators who wish to mix tractors and trailers.
  • Easy to Calibrate with Our Custom Calibration Manual
  • Compact size allows the meter to be mounted almost anywhere
  • Uses Vulcan Single Line (VSL) technology
  • Unlimited mixing of trucks and trailers without any adjustment, just plug in and go
  • Automatically identifies and adjusts for different truck/trailer configurations
  • Select the two channel V320 or the four channel V340 meter depending on your application
  • Adjustable cycle time (between channels)
  • Brilliant display - large, red LEDs with 4 brightness setting for easy viewing inside/outside the cab
  • Simple operation and calibration
  • Lockout feature allows full operation of scales while safeguarding against accidental changing of calibration settings
  • Reduced wiring - a single 2 wire cable provides power and communication for all channels
  • Complete system troubleshooting including individual load cell diagnostics
G-503 Dump Truck Shear Pin Scale System G-503-H-34 Shear Pin w/modular Hinge Kit
The Vulcan shear pin dump truck scale system operates reliably in harsh environments and is the most accurate method to measure dump truck payload weights. The standard system includes a full rear hinge assembly and bracket to replace the truck's existing hinge and bracket. For this configuration a durable Vulcan shear pin load cell under the hoist cylinder measures front end box weight, and Vulcan shear pin load cells measure weight at the rear hinge assembly. Vulcan electronics provide the operator payload weight information to optimize loading and operation. The Vulcan shear pin dump truck scale system operates reliably in harsh environments and is the most accurate method to measure dump truck payload weights. The standard system includes a full rear hinge assembly and bracket to replace the truck's existing hinge and bracket. For this configuration a durable Vulcan shear pin load cell under the hoist cylinder measures front end box weight, and Vulcan shear pin load cells measure weight at the rear hinge assembly. Vulcan electronics provide the operator payload weight information to optimize loading and operation.
Estimated install time: 10 - 12 HOURS
Installable System: This item is non-refundable.
G-513 Dump Truck Kit G-513-H34 Dump Truck Kit
The Vulcan shear pin dump truck scale system operates reliably in harsh environments and is the most accurate method to measure dump truck payload weights. The standard system includes a full rear hinge assembly and bracket to replace the truck's existing hinge and bracket. For this configuration an all-digital hydraulic pressure sensor obtains weight information by measuring hoist cylinder pressure, and durable Vulcan shear pin load cells measure weight at the rear hinge assembly. Vulcan electronics provide the operator payload weight information to optimize loading and operation.
Estimated install time: 10 - 12 HOURS
Installable System: This item is non-refundable.
G-330 End Dump / Dump Trailer Scale System
The Vulcan end dump / dump trailer scale system operates reliably in harsh environments and provides an ideal way to obtain axle and/or payload weights for end dump trailers with single point suspensions. Vulcan VSL electronics allow your trailer to drop and hook to any tractor with Vulcan VSL electronics to provide total payload weight.
Ship Wt: 230 lbs. Estimated install time: 5 - 6 HOURS
Installable System: This item is non-refundable.
No more Overweight Fines: The expense of operating overloaded is already prohibitive in many regions and is becoming a serious issue nationwide. Enforcement is increasing and penalties are becoming more costly.

Eliminate Legal Liabilities: The potential costs to a hauler from lawsuits resulting from an accident involving an overloaded truck can be severe.

Ensure Operating Safety: Overloaded trucks have significantly impaired braking distances and cornering abilities, and are more likely to experience premature failures of truck components.

Cut Maintenance Costs: Hauling legal payloads reduces maintenance expense on springs, brakes and tires, and increases the operating lifetime of the truck and body.

Increase Driver Efficiency: Our on-board scales give your drivers the assurance of hauling legal. With scales, drivers finish trips more efficiently and faster with full, legal loads.

Installation times are estimates on first time installations only. Actual installation times are dependent on the skill level of the mechanic and number of mechanics, shop equipment, on the need to possibly relocate other equipment on the truck or trailer.
Dump Truck Kits Description Ship Wt Notice Price
Vulcan-G-503

Shear pin Dump Truck scale system:
(1) M32 V320 METER
(1) V32 VSL VULCODER - 3 LEAD
(1) C04 ORANGE CABLE, 45" w / RECEPTACLE
(2) L25 2" Dia., 11 1/2" SHEAR PINS
(1) L26 13" SHEAR PIN
(1) H28 REAR HINGE ASSEMBLY
(1) H29 HOIST PIN RETAINING COLLAR
Note: Optional H34 Modular Hinge Kit Available to replace full H28 rear Hinge Assembly

150 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-503-H28

Shear pin Dump Truck scale system:
(1) M32 V320 METER
(1) V32 VSL VULCODER - 3 LEAD
(1) C04 ORANGE CABLE, 45" w / RECEPTACLE
(2) L25 2" Dia., 11 1/2" SHEAR PINS
(1) L26 13" SHEAR PIN
(1) H28 REAR HINGE ASSEMBLY
(1) H29 HOIST PIN RETAINING COLLAR
(H34 Modular Hinge Kit to replace full H28 rear Hinge Assembly)

200 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-513

Shear pin & hydraulic pressure sensor Dump Truck scale system:
(1) M32 V320 METER
(1) V23 VSL VULCODER - 2 LEAD
(1) C04 ORANGE CABLE, 45" w / RECEPTACLE
(2) L25 2" Dia., 11 1/2" SHEAR PINS
(1) L41 VSL HYDRAULIC SENSOR
(1) H28 REAR HINGE ASSEMBLY
Note: Optional H34 Modular Hinge Kit Available to replace full H28 rear Hinge Assembly

135 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-513-H28

Shear pin & hydraulic pressure sensor Dump Truck scale system:
(1) M32 V320 METER
(1) V23 VSL VULCODER - 2 LEAD
(1) C04 ORANGE CABLE, 45" w / RECEPTACLE
(2) L25 2" Dia., 11 1/2" SHEAR PINS
(1) L41 VSL HYDRAULIC SENSOR
(1) H28 REAR HINGE ASSEMBLY
(H34 Modular Hinge Kit to replace full H28 rear Hinge Assembly)

245 lbs. Installable System: This item is non-refundable. Call for Best Pricing
Vulcan-G-330

End Dump / Dump Trailer scale system:
(1) V26 VSL VULCODER - 1 LEAD
(1) Cxx ORANGE CABLE
(1) Lxx TRUNNION LOAD CELL

230 lbs. Installable System: This item is non-refundable. Call for Best Pricing

Product Menu

Apexscales.com
Direct Line - 1-330-476-2422
We record all calls for quality assurance.
CopyRight © All Rights Reserved
No Customer Data Stored on our Servers
Installable Systems/Parts/Made or Configured to order: Are NON-Refundable
Celebrating 30 years of Service in the Scale Industry.
sales@ApexScales.com
ApexEgroupLLC@gmail.com
Quotes@ApexScales.com