Direct Line:
1-330-476-2422
Quotes@ApexScales.com
Bench Scales Balance Scales Price Computing Scales Floor Scales Onboard Mining Scales Drum Scales Cardinal-Detecto Washdown Scales
Crane Scales Platform Scales Laboratory Scales Forklift Scales Onboard Scales Logging Scales Doran Scales Wireless Scales
Batching Scales Stainless Steel Scales Washdown Bench Scales Mechanical Scales Truck Axle Scales Skidsteer Scales Intercomp Scales Weigh in Motion Scales
Control Systems Shipping Scales Load Cells & Printers Medical Scales Small Plane Scales Wheel Loader Scales Precisa Scales Wheel Weigher Scales
Intrinsically Safe Stainless Steel Scales Refuse Trucks Scales Tipping Body Scales Dump Trucks Scales Livestock Scales Roll-off Truck Scales
.
Weigh Point On-Board Forklift Scales MWS
WeighPoint Cargo Lift Scale
On-Board Forklift Scales
Affordable . Effective . Unique . Easy-to-Install
Monolithic Weigh Scale System
FOR INSTANT FORKLIFT WEIGHING
Custom features available.
No lift truck modifications means instant installation and fast transfer of scale between trucks. The MWS scale meets high accuracy requirements for most applications including piece counting. This system
can utilize wireless, eliminating wired connections between carriage and cab-mounted display. The almost indestructible monolithic sensed fork design with worldwide patents pending ensures a long, trouble free life. Carry on this legacy by reinstalling on future lift trucks. This system can last a lifetime. The system's state-of-art metal film sensing technology (MEFIST) that treats the forks as load cells.
This process increases system ruggedness, permits under 2" fork thinnest, compared to typical 2.4" thick sensed forks.
The MWS structure conforms to typical strength values associated with conventional lift truck forks. The unique flexures formed into the fork blade are strain tested to a minimum factor of 5. For example,
with ITA class II forks applied to 2500 kg. lift trucks, the Weigh Point fork set has the flexures strained to 12500 kg. lift trucks, the Weigh Point fork set has the flexures strained to 12500 kg. without loss
of strength. Furthermore, the reinforced cover can withstand the stress of full load placed upon the tip fork end with placement upon the area 20" extending to the tip, however an accuracy error will
occur. To accomplish attaining these strain values the fork are produced from high quality alloyed steel typically 4130 and 4140 grades. Both Canadian and US Weights and Measure approvals, have been obtained for the legal for trade versions of the fork-sensed scale. (NTEP 100-034, AM-5668C-rev1). The MWS is in the family of fork sensed scales achieving outstanding precision that permits the following
accuracy claim. Accuracy: With load centered on the forks is 99.7% applied load +/- 5 kg to 2500 kg. The patented design rejects errors caused by bending, twisting and side loading. Accuracy is maintained without need for frequent recalibration.
Specifications for Basic Wireless Meter
• Excitation voltage 5 VDC, 80 mA
• Powers up to 4 x 350 ohm loadcells
• Operating temperature –30°C to 45°C
• No corrosive gas and no strong EMI in use field
• Non linearity 0.01% FS
• Input Signal 20 mV
• Input sensitivity 0.4 V/d
• A/D conversion rate 50 times per second
• Internal resolution 500,000 counts
• External Resolution 30,000 counts
• Specify either 110/1/60 or 8 VDC to 12 VDC
• Dimensions: 81 x 173 x 57 mm

Features
• Bright LED display
• Accumulation
• Freeze reading option
• Lb/kg selectable
• Easy to use
• Keypad programmable
• Broad voltage operating range 0 – 15 VDC
• Weigh stability
• RS232 printer output
• Splash proof (water resistant)

Note: Cableless system uses the same meter with wireless
connection to the load cells.

Model
Fork type
Capacity
Capacity
Capacity
Est Ship Wt. Made to Order
Price
WeighPoint-MWS-1
Blunt Tip
99.5% +/- 10 lbs. applied load
5,000 lbs x 5 lbs
2,500 kgs x 2 kgs
N/A lbs This item is non-refundable.
Call
WeighPoint-FS-4
Blunt Tip
100% +/- 4 lbs. applied load
5,000 lbs x 5 lbs
2,500 kgs x 2 kgs
N/A lbs This item is non-refundable.
Call
WeighPoint-MWS
Chisel Tip
99.5% +/- 10 lbs. applied load
5,000 lbs x 5 lbs
2,500 kgs x 2 kgs
N/A lbs This item is non-refundable.
Call
WeighPoint-FS-3
Chisel Tip
100% +/- 4 lbs. applied load
5,000 lbs x 5 lbs
2,500 kgs x 2 kgs
N/A lbs This item is non-refundable.
Call

 

 

 

 

Product Menu

Apexscales.com
Direct Line - 1-330-476-2422
We record all calls for quality assurance.
CopyRight © All Rights Reserved
No Customer Data Stored on our Servers
Installable Systems/Parts/Made or Configured to order: Are NON-Refundable
Debit Cards, Visa, Mastercard, Amex & JCB
Celebrating 30 years of Service in the Scale Industry.
sales@ApexScales.com
ApexEgroupLLC@gmail.com
Quotes@ApexScales.com