ApexEgroup LLC
Direct Line:
1-330-476-2422
Quotes@ApexScales.com
Bench Scales Balance Scales Price Computing Scales Floor Scales Onboard Mining Scales Drum Scales Cardinal-Detecto Washdown Scales
Crane Scales Platform Scales Laboratory Scales Forklift Scales Onboard Scales Logging Scales Doran Scales Wireless Scales
Batching Scales Stainless Steel Scales Washdown Bench Scales Mechanical Scales Truck Axle Scales Skidsteer Scales Intercomp Scales Weigh in Motion Scales
Control Systems Shipping Scales Load Cells & Printers Medical Scales Small Plane Scales Wheel Loader Scales Precisa Scales Wheel Weigher Scales
Intrinsically Safe Stainless Steel Scales Refuse Trucks Scales Tipping Body Scales Dump Trucks Scales Livestock Scales Roll-off Truck Scales
.
Wheel Axle Truck Scales

 

RL-AX 3040
Portable Axle Scale
Axle scales are an economical, adaptable, and portable solution for vehicle and truck weighing. Durable construction sets these products apart from the competition.
  • Sizes: 7 ft, 12 ft and 14 ft lengths
  • Construction: steel or aluminum
  • Capacity: 60,000 lb or 80,000 lb
  • JB4SS Tuff Seal Signal Trim Junction Box
  • Treaded top plate with four lifting eyes
  • 10 ft EL146HE Interconnect cable with MS-type connectors to go between weigh pads
  • 50 ft EL147HE cable to connect weigh pad to indicator
  • The AX3040 axle scale is a necessity for monitoring vehicle weights in any temporary site. Easily portable and available in multiple lengths, comprised of either aluminum or steel, the AX3040 axle scale is completely customizable to your needs. The AX3040’s weighing capacity is 60,000 to 80,000 pounds. The indicator connects to the weigh pad up to fifty feet away for position flexibility.
    Model Steel
    Set Capacity
    Size
    Ship Wt.
    RL-AX-3040-60K-7-Steel
    60,000 lb (30,000 lb each Pad)
    2.5 ft W x 7ft L x 5.63 H
    1,817 lb
    RL-AX-3040-80K-12-Steel
    80,000 lb(40,000 lb each Pad)
    2.5 ft W x 12ft L x 5.63 H
    3,565 lb
    RL-AX-3040-80K-14-Steel
    80,000 lb(40,000 lb each Pad)
    2.5 ft W x 14ft L x 5.75 H
    4,485 lb
    Ramp-Steel
    Description
    Size
    Ship Wt.
    RL-AX-3040-Ramp-Steel
    Steel access ramps set of four
    32 in W x 25.25 L x 5.63 H
    750 lb
    Model Aluminum
    Set Capacity
    Size
    Ship Wt.
    RL-AX-3040-60K-7-Aluminum
    60,000 lb (30,000 lb each Pad)
    2.5 ft W x 7ft L x 5.63 H
    1,030 lb
    Ramp -Aluminum
    Description
    Size
    Ship Wt.
    RL-AX-3040-Ramp-Aluminum
    Aluminum access ramps set of four
    32 in W x 25.25 L x 5.63 H
    270 lb

    IQ-plus 710
    High-performance industrial weighing
    NTEP
    General purpose weighing. High-performance industrial weighing, Batch weighing, Truck weighing applications .

    Standard Features:
    • Stainless steel NEMA 4X/IP66 washdown enclosure
    • Large 0.75" (19mm) Vacuum Fluorescent Display (VFD) with 16 characters for operator prompting
    • Selectable analog to digital measurement rate
    • 5-point linearization calibration
    • 4 macros,30 steps each, ability to interconnect macros with setpoints (macro can start batch setpoints)
    • 8 digital inputs plus 8 digital outputs
    • 60 16-character programmable alphanumeric fields for display prompts
    • Power for eight 350-ohm load cells or 16 700-ohm load cells
    • 115 or 230 VAC, 50/60 Hz
    • Expanded 29-key keyboard
    • Full alphanumeric keypad for entering truck ID, numbering, prompts, etc.
    • 300-ID truck in/out programs (6 modes), seven characters
    • Batching and continuous mode setpoint functions
    • Programmable consecutive numbering
    • Two communication ports: (1) EDP port, full duplex RS-232 or RS-485, (1) printer port, simplex RS-232 or 20 mA
    • Operate, configure and calibrate via 2 interfaces: front panel (keyboard & display) or EDP serial command port (RS-232, RS-485)
    • Six 300-character programmable output formats, independent transmission to EPD or printer port
    • 300-character alphanumeric "title block" for custom printouts
    • Completely menu driven
    • Angled/sloped keypad for user comfort
    • Time and date
    • Accumulator

    Model
    Description
    RLW-IQPlus710
    NEMA 4X stainless steel enclosure

    Product Menu

    Notice: We record all calls for quality assurance. / $ 250.00 Minimum Orders / Some State Require's us to pay your State Sales Tax.
    Most of our manufacture's (RLWS, SI & Vulcan Scales) has a presence in the states listed below. These States will not honor our tax certificate. To avoid paying sales taxes please provide tax exempt paper work for your company.
    RLWS Taxable States:
    CALIFORNIA, OHIO, FORIDA, HAWAII, MARYLAND, MASSACHUSETTS, MISSISSIPPI
    SI Scales & Vulcan Scales Taxable States:
    CALIFORNIA, CONNECTICUT, GEORGIA, ILLINOIS, KANSAS, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, OHIO, PENNSYLVANIA, SOUTH CAROLINA, TEXAS, WASHINGTON, WISCONSIN.
    Note: California: has a drop ship tax - CA SALES TAX - 10% DROP SHIP on some items.
    Apexscales.com
    ApexEgroup LLC Direct Line - 1-330-476-2422
    We record all calls for quality assurance.
    CopyRight © All Rights Reserved
    No Customer Data Stored on our Servers
    Installable Systems/Parts/Made or Configured to order: Are NON-Refundable
    Celebrating 31 years of Service in the Scale Industry.
    International: ApexEgroupLLC@gmail.com