ApexEgroup LLC
Direct Line:
Bench Scales Balance Scales Price Computing Scales Floor Scales Onboard Mining Scales Drum Scales Vulcan Scales Washdown Scales
Crane Scales Platform Scales Laboratory Scales Forklift Scales Onboard Scales Logging Scales Doran Scales Wireless Scales
Batching Scales Stainless Steel Scales Washdown Bench Scales Mechanical Scales Truck Axle Scales Skidsteer Scales Intercomp Scales Weigh in Motion Scales
Control Systems Shipping Scales Load Cells & Printers Medical Scales Small Plane Scales Wheel Loader Scales Precisa Scales Wheel Weigher Scales
SI Road Runner Platform Aircraft Scale Systems Refuse Trucks Scales Tipping Body Scales Dump Trucks Scales SI Scales Roll-off Truck Scales
Because of the nature of our business, Our suppliers will remain operational as an Essential Service throughout the corona virus shutdowns.
Loss-in-Weigh Dispensing Controls Scales

920i FlexWeigh 103
Loss-in-Weigh Dispensing Controls
Print, Tare, Weigh (2 Speed Dispense), Print, Hold (Refill, Hold)

Pre-engineered and pre-programmed 920i FlexWeigh Systems are Rice Lake’s turnkey answer to many of manufacturing’s most commonly used weighing processes, providing clearly defined, immediate solutions for almost any operation. 920i FlexWeigh Systems combine the power and versatility of the 920i interface with the simplicity and strength of the FlexWeigh control panel.

No need for lengthy quoting or design obstacles. Each 920i FlexWeigh model is a standard design in its own right, factory tested and programmed for the task at hand. Stainless steel NEMA-4X enclosures and rugged, customizable operation switches guarantee industrial-strength and dependability, day after day, year after year.

Once you’ve selected the right model for the job, your 920i FlexWeigh System is shipped complete and ready to weigh, seamlessly transitioning almost any measurement task, into a fully automated weighing process.

Standard Features
  • Wallmount stainless steel enclosure
  • Application program 101, 102, 103, 104
  • Front panel switches: E-Stop, reset/resume, start
  • Softkeys for presets, CN#, ID#, formula#, totals
  • Accumulating subtotal & total registers
  • Transmitted audit trail
  • Digital I/O Board
  • Relay rack and SSR relay outputs

The 920i FlexWeigh 103 is designed for applications where a preset target weight is repeatedly dispensed from a tank or hopper scale. The system maintains weight within high and low limits to
guarantee enough content for a complete dispense cycle. Press Start and the system automatically tares the scale, begins the loss-in-weight dispense, and stops as programmed—all while transmitting and storing the accumulated weight totals.

Use the following steps to dispense material from a scale.
1. Press the Start button on the unit. The system verifies the E-Stop button is pulled out and a valid target weight has been entered.
2. The system verifies the weigh to make sure it's above the target weight and above the low level weight. If the weight is below the low level weight, it will refill the scale to the high level weight. When the weight reaches the high level weight, the refill output will turn off. The operator then may press the Start button to start the dispensing material.
3. The system does the following during this process.
• Turns off the Dispense Complete and Refill Complete outputs
• Increments the consecutive number by one
• Tares the scale to zero (net mode)
4. The system begins dispensing either of three speeds while the 920i screen displays real time sequence progress. The displayed net weight will continue showing more negative as weight is dispensed, until the target weight presets are achieved. Those three dispensing speeds include:
• Single speed dispensing - The system turns on fast dispense until the target weight/ preact weight is satisfied.
• Parallel speed dispensing - Turns on the fast dispense and slow dispense until the dribble weight is satisfied. The system then turns off the fast dispense and leaves the slow dispense on until the target weight/preact weight is satisfied.
• Dual speed dispensing - Turns on the fast dispense until the dribble weight is satisfied. The system turns on the slow dispense until the target weight/ preact weight is satisfied.
5. The system does the following when the target/preact is reached.
• Turns off the output based on the dispensing mode
• Update the subtotal weight and number of dispenses
• Updates the total and number of dispenses
• Turns on the Dispense Complete output.
6. The system delays for the Delay After Dispense time before it exits the sequence and ready for the next dispense.

Standard Features:
• Stainless Steel NEMA 4X enclosure
• Pre-programmed and configured 920i HMI Indicator/Controller
• Heavy-duty push buttons and switches E-stop, Start, Reset/Resume
• Built-in safety interlocks prevent cycle start if not enough weight is in the scale to complete a target weight dispense.
• (3) 2amp, 120 VAC feed output (fast feed, slow feed and refill)
• Emergency stop which can be resumed at any point
• Auto Tare on START
• Auto Print and Weight Total

• Switches for manual-override control
• Large-diameter pilot lights
• 120 VAC outputs for: Dispense Complete, Slow Cycle, and Refill Complete
• Customized software and hardware configurations
Note: All control systems are Consult before ordering
Model Description Price
Flexweigh-103-120322 Indicator, 920i Flexweigh Systems 103, Stainless Steel Wallmount, 115/230VAC $ 3,550.00



Product Menu

ApexEgroup LLC Direct Line - 1-330-476-2422
We record all calls for quality assurance.
CopyRight © 1987-Present Date
No Customer Data Stored on our Servers
Installable Systems/Parts/Made or Configured to order: Are NON-Refundable
Celebrating 33 years of Service in the Scale Industry.
Note: Because the nature of our business our products are in-line with the manufacturer's policies and are non-refundable. Scales, Installable Systems, Electronic Parts, Made to order, Configured systems are non-refundable.
Some manufacture's & states require's us to pay your State Sales Tax.
Most of our manufacture's (RLWS, SI, Vulcan Scales, VPG) has a presence in the states listed below. These States will not honor our tax certificate.
We try to cover the tax if we can. Purchase of mutiple system all tax and shipping are normally covered.
RLWS Taxable States:

California, Florida, Illinois, Maryland, Pennsylvania, Indiana, Louisiana, Massachusetts, Mississippi, New York, Virginia, West Virginia, Wyoming

SI Scales & Vulcan Scales, VPG taxable States: