Direct Line:
1-330-476-2422
Quotes@ApexScales.com
Bench Scales Balance Scales Price Computing Scales Floor Scales Onboard Mining Scales Drum Scales Cardinal-Detecto Washdown Scales
Crane Scales Platform Scales Laboratory Scales Forklift Scales Onboard Scales Logging Scales Doran Scales Wireless Scales
Batching Scales Stainless Steel Scales Washdown Bench Scales Mechanical Scales Truck Axle Scales Skidsteer Scales Intercomp Scales Weigh in Motion Scales
Control Systems Shipping Scales Load Cells & Printers Medical Scales Small Plane Scales Wheel Loader Scales Precisa Scales Wheel Weigher Scales
Intrinsically Safe Stainless Steel Scales Refuse Trucks Scales Tipping Body Scales Dump Trucks Scales Livestock Scales Roll-off Truck Scales
.
Precision Loads Tipping Body Truck Scales

 

Hook Lift Rolloffs (Stellar, AMPLIROLL)
Tipping Body Trucks
Body Rest Mount Kit for Live Weigh Applications
Accurate and reliable payload measurement is an important element of profitability and operating safety in bulk hauling. Whether for municipal, county, state or private operations, Precision Loads on-board scale systems allow optimum, safe and legal use of a truck’s payload capacity-both for maximizing loads and preventing the liabilities of overloading.
System Accuracy: Typically +/- 1% of full scale load
Digital Graduations: 10, 20, 50 or 100 lbs/kgs
Displays: Total Truck Gross Weight, Net Payload Weight, Steering Axle Weight, Drive Axle Weight.
No more Overweight Fines: The expense of operating overloaded is already prohibitive in many regions and is becoming a serious issue nationwide. Enforcement is increasing and penalties are becoming more costly.

Eliminate Legal Liabilities: The potential costs to a hauler from lawsuits resulting from an accident involving an overloaded truck can be severe.

Ensure Operating Safety: Overloaded trucks have significantly impaired braking distances and cornering abilities, and are more likely to experience premature failures of truck components.

Cut Maintenance Costs: Hauling legal payloads reduces maintenance expense on springs, brakes and tires, and increases the operating lifetime of the truck and body.

Increase Driver Efficiency: Our on-board scales give your drivers the assurance of hauling legal. With scales, drivers finish trips more efficiently and faster with full, legal loads.

Precision Loads Hook Lift systems kits are typically requiring between 24 man-hours per truck, including wiring. (Stellar, AMPLIROLL)
System electronics are designed for simplicity. Display units may be mounted in the truck cab or environmentally-protected units are available for external mounting. The PL9700 Digital Display provides operators with: Total Truck Gross Weight, Net Payload Weight, Steering Axle Weight, Drive Axle Weight.
The PNT 9700 Weigh Indicator
The First Truly Self-Diagnostic Indicator with on-Screen Programming
100 % Compatible with 9100GW

Display individual channel and Total weights at the same time

Designed for flexibility, the PNT 9700 Weigh Indicator is the latest technology in on-board scale electronics for the trucking industry. It can be easily modified to meet the needs of changing system requirements.
The five user soft keys allow you to produce key functions that are unique to your application.

  • Super-Bright, .6” high, red, seven segment LED display.
  • Two-wire, non-polarity sensitive, digital technology provides ultimate reliability.
  • An Advanced Calibration function for calibrating the scale without a load.
  • Simple diagnostics allow each system component to be quickly checked from the cab.
  • Capable of monitoring individual load cell outputs.
  • Quick switching from GROSS to NET and quick TARE RESET.
  • Easy trailer ID Function provides for interchanging multiple trailers and tractors.
  • Compatible with all models of On-board scale load cells and sensors.
  • 100 % Compatible with 9100GW
System Technical Specifications:

Loadpin Sizes: Pin sizes exist for most tipping body manufacturers
Loadpin Strength: 150,000 psi tensile strength. Heat-treated SAE4340 alloy steel material or better.
Communications: Digital 2-wire communications from loadpin transmitters
Transmitter: 16-bit per input technology. Encapsulated circuitry sealed in stainless enclosure
Main Display: 0.70" high Bright Red LED digits
Message Display: 2 x 24 Dot-matrix LCD
Input Power: 9 to 16 Volts dc, 350 mA consumption typical
Display Data: Lift-to-Weigh, Gross Weight, Net Weight, Axle 1 Weight, Axle 2 Weight
Digital Graduations: 10, 20, 50 or 100 lbs/kgs
System Accuracy: Typically +/- one percent of full scale load
Optional: Weatherproof Enclosure, In-cab 12 Vdc Printer, Remote Zero/Print Smash Buttons
Body Rest Mount Kit for Live Weigh Applications
For installations of on-board systems on tipping bodies or hoist chassis which require live weighing, as opposed to Lift-to-Weigh applications, body-rest load cell installations are required. Rice Lake Weighing Systems typically supplies body rest kits in four or six point configurations, with two load pins typically installed at the rear hinge pivots. The front two (or four) load cells used for body rest mounting utilizing Groove-Lock hardware is typically the model PL9000-14.4 shear beam load cell.
Locate and mark positioning for the load cell mounts on each side of the chassis and body or hoist subframe rails.

Clamp chassis angles to the truck frame rails on each side in the desired locations (front and center mounts). Location of the chassis bracket should avoid and rotation or movement of the lift cylinders from relaxed to fully upright position, as well as chassis-mounted items that are not easily moved, and should attempt to utilize as many preexisting chassis bolt holes as possible (to minimize the drilling of new holes).

Mount the load cells on the chassis angles along with Groove Lock hardware parts to establish location of the body angles on the body or hoist chassis subframe. The decision on the location of the body angles must also consider possible movement of equipment or obstructions on the subframe (example: roll-off hoist chassis) and strength of the body subframe itself (example: location of cross members). The installer must provide reinforcing to any body subframe which may require it. Examples of subframe reinforcing are the addition of frame doubler, additional crossmember straps, gussets to the body structure, etc.
 
Tipping body/hoist chassis kits Description Tipping body/hoist chassis kits (hook lift rolloffs -Stellar, AMPLIROLL) Notice Price
PL-9700-3100LP-118572 Tipping Body/ Hoist: Six Point Pivot Pin Kit with Groove Lock Load Cells, Live Weigh Kit Includes: 9710, 6 Lead Transmitter, 35' Truck cable, 15' power cable, 94) Bearing Plates, (4) 14.4 (12,500 lbs) Shear Beam Underbody Load Cells. (4) Groove Lock Kits, (2) Labrie hinges Pin Kits (50,000 lb Max w/ dead load) Installable System: This item is non-refundable. $8,400.00

 

Optional Printer
The printer is powered through the RS-232 connector and uses a default baud rate of 9600. There are three print tickets available:
Time & date together with individual and total bin collections from a site and truck information is printed. This mode can also be used with the additional keyboard to enter an account number for the site.
MtP400si Direct Thermal Printer, Printek
This compact direct thermal model is built in the USA and meets the challenges of many rugged industrial environments. Perfect for on-board applications such as forklifts, trucks and more.
  • Designed for superior resistance to impact and harsh chemicals
  • IP54 rated for water and dust resistance
  • Rugged, screw down connector for power and data
  • Simple drop-in paper loading
  • Direct thermal printing
  • Wide input voltage range and superior circuit protection
  • On-Board Weighing, Forklift applications
  • Data/Power Cable and one roll of paper supplied with printer
  • Printek printers are made in the USA
Model Description Price
Printer-PL6050D-114316 MtP400SI 4" direct thermal printer includes mounting bracket. RS-232 cable, Power cable, 2 rolls of paper. $1,540.00

 

 

 

 

Product Menu

Apexscales.com
Direct Line - 1-330-476-2422
We record all calls for quality assurance.
CopyRight © All Rights Reserved
No Customer Data Stored on our Servers
Installable Systems/Parts/Made or Configured to order: Are NON-Refundable
Celebrating 30 years of Service in the Scale Industry.
sales@ApexScales.com
ApexEgroupLLC@gmail.com
Quotes@ApexScales.com