ApexEgroup LLC
Direct Line:
1-330-476-2422
Quotes@ApexScales.com
Bench Scales Balance Scales Price Computing Scales Floor Scales Dump Trucks Scales Drum Scales PNT Scales Washdown Scales
Crane Scales Platform Scales Laboratory Scales Refuse Trucks Scale Onboard Scales Logging Scales Doran Scales Wireless Scales
Batching Scales Stainless Steel Scales Washdown Bench Scales Mechanical Scales Truck Axle Scales Skidsteer Scales Intercomp Scales Weigh in Motion Scales
Control Systems Shipping Scales Load Cells & Printers Medical Scales Small Plane Scales Wheel Loader Scales Precisa Scales Tipping Body Scales
 
.
PNT Replacement Components For Onboard Scales - PNT Scales Parts
PNT 2100 100 % Compatible with SI-9100GW
PNT 2100-V 100 % Compatible with Vulcan V-200
The Model 2000 In-cab Meter from PN Technologies is used in all on-board scale applications requiring dual channel weight displays. Total vehicle weight is displayed as well as individual tractor and trailer weights. The PNT 2000 meter can be set to cycle automatically between individual channel weights and total weight displays. The operator can press the cycle button at any time to stop and monitor any channel desired.
  • 100 % Compatible with SI-9100GW & Vulcan V-200
  • Two channel models for long and short loggersB-trains and chip vans.
  • LargeSuper-Bright Red seven-segment LEDs Display.
  • Two-wire (non-polarity sensitive) digital technology.
  • An Advanced Calibration function for calibrating the scale without a load.
  • Rugged and reliable design tested over all environments.
  • Quick and simple calibration.
  • Simple diagnostics allow quick testing of each system component.
  • Compatible with all models of On-board scale load cells and sensors.
  • Transcoders built of heavy-gauge stainless steel.

PNT 9700 100% Compatible with 9100GW.

2 Channel - with RS-232
Designed for flexibility, the PNT 9700 Digital Weight Indicator is the latest technology in on-board scale electronics for the trucking industry. It can be easily modified to meet the needs of changing system requirements. The five user soft keys allow you to produce functions that are unique to your application. The 9700 two channel indicator is designed for versatility. The PNT 9700 is extremely reliable and easy to operate.
  • Two channel models for long and short loggersB-trains and chip vans.
  • Super-Bright, .6” high, red, seven segment LED display.
  • Two-wire, non-polarity sensitive, digital technology provides ultimate reliability.
  • An Advanced Calibration function for calibrating the scale without a load.
  • Quick switching from GROSS to NET and quick EMPTY WEIGHT RESET.
  • Capable of monitoring individual load cell outputs.
  • Weight-to-go feature which instantaneously (instantly) shows how much weight must be loaded to reach maximum legal payload.
  • Compatible with all models of On-board scale load cells and sensors.
  • 100% Compatible with 9100GW.
PNT 9705 100% Compatible with 9100GW.
Communicates with  8042, 8052 Smart Accu-Link Series
2 Channel - with RS-232

PNT 9705  Auto-ID  On-Board Indicator for Long loggers

The First Truly Self-Diagnostic Indicator with on-Screen Programming Display individual channel and Total weights at the same time The PNT9705 Auto-ID used with the PNT8402 transmitter is a boon to operators of multiple trucks and trailers.  Mixing trucks and trailers will no longer require adjustments or re-calibration and, with individual cables, separate signals are supplied for each channel.  Failure of one channel will not disable the entire system.  The five user soft keys allow you to produce key functions that are unique to your application.
  • Two channel models for long and short loggersB-trains and chip vans.
  • Super-Bright, .6” high, red, seven segment LED display.
  • Two-wire, non-polarity sensitive, digital technology provides ultimate reliability.
  • An Advanced Calibration function for calibrating the scale without a load.
  • Quick switching from GROSS to NET and quick EMPTY WEIGHT RESET.
  • Capable of monitoring individual load cell outputs.
  • Weight-to-go feature which instantaneously (instantly) shows how much weight must be loaded to reach maximum legal payload.
  • Compatible with all models of On-board scale load cells and sensors.
  • 100% Compatible with 9100GW.
  • Communicates with  8042, 8052.
  • Plug and Go
  • Option: TTL logic port for relays or other control functions.
  • Option: Dual serial data ports are standard. Can be interfaced with printers, remote displays,  bar code scanners, computers and other serial devices using RS-232.
PNT 9710  On-Board Indicator for Underbody Scales
2 Channel - with Dual Serial Ports - RS-232

The First Truly Self-Diagnostic Indicator with on-Screen Programming Display individual channel and Total weights at the same time.Designed for flexibility, the PNT 9710 Weigh Indicator is the latest technology in on-board scale electronics for the trucking industry. It can be easily modified to meet the needs of changing system requirements.The five user soft keys allow you to produce key functions that are unique to your application.

Feature

  • Two Channel
  • Dual displays,
  • Super-Bright, .56” high, LED - 2 x 24 Dot Matrix LCD with backlight..
  • Two-wire, non-polarity sensitive, digital technology provides ultimate reliability.
  • An Advanced Calibration function for calibrating the scale without a load.
  • Simple diagnostics allow each system component to be quickly checked from the cab.
  • Capable of monitoring individual load cell outputs.
  • Quick switching from GROSS to NET and quick TARE RESET.
  • Load/Delivery mode for incremental load or delivery.
  • Axle weight formula accurately calculates steering axle weight.
  • Time and date to use with printer.
  • Dual serial data ports are standard. Can be interfaced with printers, remote displays,  bar code scanners, computers and other serial devices using RS-232.
  • TTL logic port for relays or other control functions.
  • Compatible with all models of On-board scale load cells and sensors.
  • Communicates with 7041, 7042, 7154, 7156.
PNT 9704 100 % Compatible with SI-9100QC
4 Channel - with RS-232

Designed for flexibility, the PNT 9704 Weigh Indicator is the latest technology in on-board scale electronics for the trucking industry.
It can be easily modified to meet the needs of changing system requirements.
The five user soft keys allow you to produce key functions that are unique to your application.

The 9704 four channel indicator is designed for versatility.
The 9704 can easily be programmed for two, three or four channels. Use it on a standard two channel logger, a three channel "B" train or a four channel.
The indicator retains the calibration information of all four channels which makes it very easy to switch from a long logger to a short logger without having tore-enter any calibration information. The PNT 9704 is extremely reliable and easy to operate.

  • Wireless Ready
  • Four channel models for long and short loggers, B-trains and chip trailers
  • Super-Bright, .6” high, red, seven segment LED display.
  • Two-wire, non-polarity sensitive, digital technology provides ultimate reliability.
  • An Advanced Calibration function for calibrating the scale without a load.
  • Simple diagnostics allow each system component to be quickly checked from the cab.
  • Capable of monitoring individual load cell outputs.
  • Quick switching from GROSS to NET and quick TARE RESET.
  • Easy trailer ID Function provides for interchanging multiple trailers and tractors.
  • Compatible with all models of On-board scale load cells and sensors.
  • 100 % Compatible with SI-9100QC
PNT-600-RF
PNT 601 Wireless Transmitter PNT 602 Wireless Receiver

The CableLink Wireless System allows you to eliminate the potentially troublesome long data cable from the trailer reach cable to the meter.  The PNT 601 Wireless Transmitter(s), connected to the transmitters, send data to the PNT 602 Wireless Receiver.   The Receiver connect to any of the PNT 9700-series indicators.  The Wireless 601 transmitter(s) are powered by the trailer's 12-volt wiring and provide power to the load cells. No more downtime and expense from repairing or replacing damaged truck and trailer connectors.
Features

  • Replace trailer cable
  • Direct sequence spread spectrum at 2.4 GHz
  • Indoor, up to 300 ft
  • Outdoor RF line-of-sight, up to 3000 ft
  • Antenna: Wire, Internal
  • Interface with PNT 9700 transmitters series
PNT-500 Hand Held Remote
PNT 500 Wireless Handheld Display PNT 501Wireless Transmitter

The PNT 500 Hand Held Display allows you to remotely view the scale indicator information. The PNT 501 RF transmitter connects to the RS-232 port on the PNT 9700-series indicators and transmits the data to the PNT 500 Wireless Handheld Display. Do you load your own logs? The RF remote display allows you to monitor the truck's weight from your seat in the loader. No longer will you need to climb down from the loader to look at your 9700 indicator in the truck cab.

Features:

  • Provides a remote display of weight information from PNT 9700-series indicators.
  • Uses Direct Sequence Spread Spectrum technology
  • Typical range of 500 ft (depending on conditions)

PNT 500 Display:

  • 2 X  16 Dot Matrix LCD display with backlight
  • User scan PNT 501-TX ID number
  • Gross, Net, Load/Deliver modes
  • Units can be displayed in pounds or kilograms
  • Auto-off after 5 minutes
  • Can operate over 30 hours on 2 AA batteries

Your straight truck or dump truck can be loaded to the legal maximum each and every time. Knowing your weight at the time of loading saves time and fuel by reducing out-of-route miles to a scale. Overweight trucks cause fines along with increased truck and suspension maintenance. The weather-protected Deflection Transducer can be easily installed without removing any of the truck’s suspension, body, or chassis components.  The transducer mounts directly on the truck and/or trailer suspension, including front axles, walking beams, and Mack camel back.  The driver will always know the true axle weights and gross vehicle weight (GVW).

Specifications

  • 350 ohm impedance
  • Operating temperature: -40 to 158F
  • Dim: 1” x 1” x 6.45”
  • NEMA 4X
  • The accuracy of systems using secondary transducers is heavily influenced by environmental conditions and the truck's structure.
  • Nickel plated for corrosion protection

Features

  • Easy installation
  • Accurate to 2%
  • Gross weight and axle weight displayed
  • Install without removing chassis components
  • Can be installed on all types of trucks
  • Rugged and reliable design tested over all environments
  • Load to the maximum
  • Avoid overweight fines
  • Reduce equipment repairs by not  overloading
  • No side trips to the scale saves fuel
  • Maximize efficiency

PNT Replacement Components Onboard Scales - CableLink Wireless System & Hand held remote display
Model Component Description Component Description Price
PNT-600-RF Trailer Wireless Kit Transmitter & receiver Call
PNT-500 Hand Held Remote Hand held Remote kit Hand held Remote kit Transmitter & Hand held remote display Call

 

PNT Onboard Scales - Digital Indicator
Model Replacement For Component Description Price
PNT-9700 9700 Indicator + RS 232 (SI-9100GW Compatible) In cab display- Dual Channel, Gross, Net $799.00
PNT-9710 9710 Indicator + 2 x RS 232 In cab display- Dual Channel, Gross, Net Call
PNT-9705 9705 Indicator - Auto ID + RS 232 In cab display- Dual Channel, Gross, Net Call
PNT-9704 4 Channel + RS 232 PNT 9704 is 100 % (Compatible with SI-9100QC) In cab display- Four Channel, Gross, Net (very popular for short logger) $997.00
Model Replacement For Component Description Price
PNT-2100 PNT 2100 is (Compatible with SI-9100GW) In cab display- Dual Channel, Gross, Net $699.00
PNT-2100V PNT 2100-V is (Compatible with Vulcan V-200) In cab display- Dual Channel, Gross, Net $699.00

 

PNT Onboard Scales - Load Cells
Model Aftermarket & Replacement For Component Description Price
PNT-532623-26" 26" Full twist compensation load cell - SI, Vulcan, Precision Loads 26 inch shear beam load cell 12,000 lbs $650.00
PNT-2050-Load Cell Mounting Kit Load Cell Mounting Kit - 2(20501) - 2(1 1/8-12 3 1/4 HCSGR8)3(1-14 1 3/4 HCSGR8) - 2(1 1/8 F436) - 3(1 F436) Call
PNT-532825-28" 28" Full twist compensation Heavy Duty Load Cell (Vulcan L27)   $1,025.00
PNT-531825-15" Side 15" Full twist compensation load cell, Side connector (Vulcan L02 Side Connector)   $645.00
PNT-531825-1 -15" Pigtail 15" Full twist compensation load cell 3' Pigtail (Vulcan L66 )   $695.00
PNT-98051-Single Port Smart Air Sensor, Single Port   $625.00
PNT-98502 -Dual Port Smart Air Sensor, Dual Port   $895.00
PNT-26" Rebuild with good core PNT-26"-shear-beam load cell -Load Cell Rebuild with good core + shipping Any Brand Load Cell Rebuild with good core $405.00

 

PNT Onboard Scales - Deflection Transducer
Model Component Description Price
PNT-6012 Side Mount Deflection Transducer,Mounts directly on the truck and/or trailer suspension, including front axles, walking beams, and Mack camel back. $610.00
PNT-4050 Side Mount Deflection Transducer , Mounting Kit Call

 

PNT Onboard Scales - Transmitter & V200, Cables
Model Discription  9700 Accu-Link Series Price
PNT-7041 9700 AccuLink, Transmitter, Stainless Steel Enclosure - 1 lead, 4 pin Call
PNT-7042 9700 AccuLink, Transmitter, Stainless Steel Enclosure - 2 lead, 4 pin Call
PNT-7056 9700 AccuLink, Transmitter, Stainless Steel Enclosure - 6 lead, 4 pin Call
Model Discription  9700 Smart Accu-Link Series Price
PNT-8041 9705 Smart Acculink, Transmitter, Stainless Steel Enclosure - 1 lead, 4 pin Call
PNT-8042 9705 Smart Acculink, Transmitter, Stainless Steel Enclosure - 2 lead, 4 pin Call
Model Discription  Price
PNT-2100V (Vulcan V-200 Meter) PNT 2100V is (Compatible with Vulcan V-200 meter & SI-9100) $699.00
PNT-20010 (V-200 Vulcoder) Compatible with Vulcan V200 Vulcoder - Stainless Steel Enclosure - 2 lead, 4 pin, With 3 pin cable $445.00
Model Cables Discription  Price
PNT- 216-06 Cable, 6', 12V, 1 Connector, 2-Conductor Call
PNT- 216-35 Cable, 35', 12V, 1 Connector, 2-Conductor Call
PNT- 216-40 Cable, 40', 12V, 1 Connector, 2-Conductor (Cable 40 REACH 3-Socket/Pigtail )(SI Part # 7100173-01) Call
PNT- 216-80 Cable, 80', 12V, 1 Connector, 2-Conductor (Cable 80' 3-Socket/Pigtail ) Call
PNT- 016-40 Cable, 40', 16AWG, 2-Conductor (SI Part # 8100219-37- Meter To Reach Cable) Call
PNT- 016-35 Cable, 35', 16AWG, 2-Conductor Call
Model Discription 8700 Transmitter Series. (9100GW Transmitter Compatible) Price
PNT-8701 Transmitter, Stainless Steel Enclosure - 1 lead, 4 pin (SI Part # 81-00187-01)(SI Single Sensor Application Axle Transducer) $420.00
PNT-8704 Transmitter, Stainless Steel Enclosure - 4 lead, 4 pin (SI Part # 81-00187-04) (SI Short Logger) $525.00
PNT-8705 Transmitter, Stainless Steel Enclosure - 2 lead, 4 pin (SI Part # 81-00187-05) (SI Long Logger) $420.00
PNT-8706 Transmitter, Stainless Steel Enclosure - 2 lead, 4 pin (SI Part # 81-00187-06)(SI For 8300370-10R Deflection Transducer High Gain) $452.00
PNT-22005 Transmitter, Stainless Steel Enclosure - 2 lead, 7 pin (SI Part # 81-00220-05) $525.00

Product Menu

ApexScales.com
ApexEgroup LLC Direct Line - 1-330-476-2422
We record all calls for quality assurance.
CopyRight © 1986  - Present Date
No Customer Data Stored on our Servers
Prices subject to change without notice.
 
International: ApexEgroupLLC@gmail.com
 USA: Quotes@ApexScales.com
Celebrating 35 years of Service in the Scale Industry.
Note: Because the nature of our business our products are in-line with the manufacturer's policies and are non-refundable. Scales, Installable Systems, Electronic Parts, Made to order, Configured systems are non-refundable.

Due to price increases in material/freight costs, All our Suppliers unfortunately had to increase pricing.