ApexEgroup LLC
Direct Line:
1-330-476-2422
Quotes@ApexScales.com
Bench Scales Balance Scales Price Computing Scales Floor Scales Dump Trucks Scales Drum Scales PNT Scales Washdown Scales
Crane Scales Platform Scales Laboratory Scales Refuse Trucks Scale Onboard Scales Logging Scales Doran Scales Wireless Scales
Batching Scales Stainless Steel Scales Washdown Bench Scales Mechanical Scales Truck Axle Scales Skidsteer Scales Intercomp Scales Weigh in Motion Scales
Control Systems Shipping Scales Load Cells & Printers Medical Scales Small Plane Scales Wheel Loader Scales Precisa Scales Tipping Body Scales
 
.
PNT Long-Logger Truck Scales
 
PNT Long-Logger Truck Scales
High-Accuracy On-Board Weighing Systems For Logging Trucks

Complete Long Logger Kit:
1- PNT 2100 indicator w/ manual
2- 8705 Transmitter 2 leads
1- 216-80 Truck Cable
1- 216-35 Truck Cable
4- 532623 26" Load Cells
8- Load Cell Bearing Plates

Hauling Timber Product?
Avoid the cost of underloading and overloading and ensure maximum safe and legal payloads on every tractor and trailer—every trip
Accurate and reliable payload measurement is an important element of profitability and operating safety bulk hauling. Whether for municipal, county, state or private operations, on-board scale system allows optimum, safe and legal use of a truck's payload capacity-both for maximizing loads and preventing the liabilities of overloading.

The Model 2100 In-cab Meter from PN Technologies is used in all on-board scale applications requiring dual channel weight displays. Total vehicle weight is displayed as well as individual tractor and trailer weights. The PNT 2100 meter can be set to cycle automatically between individual channel weights and total weight displays. The operator can press the cycle button at any time to stop and monitor any channel desired.

  • 100 % Compatible with SI-9100GW.
  • Two channel models for long and short loggersB-trains and chip vans.
  • LargeSuper-Bright Red seven-segment LEDs Display.
  • Two-wire (non-polarity sensitive) digital technology.
  • An Advanced Calibration function for calibrating the scale without a load.
  • Rugged and reliable design tested over all environments.
  • Quick and simple calibration.
  • Simple diagnostics allow quick testing of each system component.
  • Compatible with all models of On-board scale load cells and sensors.
  • Transcoders built of heavy-gauge stainless steel.

The PNT 9700-series indicators feature some of the most advanced technology available for on-board scale systems and are compatible with all PNT load cells and transducers. Indicators are available to display 2, 3, or 4 channels to accommodate a variety of operations.
Easy trailer ID function provides for interchanging multiple trailers and tractors.
Simple diagnostics lets the operator quickly check each system component.  
(RS-232)The serial-interface feature allows communication with a variety of devices, such as computers, printers, remote displays, bar-code scanners or 4-20mA converter.
The setpoint function lets the operator know when the pre-programmed weight is achieved.
Two channel - Two wires non Polarity sensitive, digital technology provides  ultimate reliability
- Display individual channel and total weights at the same time.

100 % Compatible with SI-9100GW.

26" Shear Beam Load Cell (12,500 lb) w/Bearing Plate
Installed and painted
1 Load cell on each side of the bunk
A modern on-board weighing system consists of load cells to sense the load’s weight, transmitters and cables to send the load-cell output to the indicator, and an indicator to change the signals into information usable by the operator. Load cells are precision-machined high-strength steel beams with strain gages bonded inside. The load cell is installed on the truck between the load receiving deck and the truck frame. When loads are applied to the truck, the strain gages sense the weight of the load and send a small electrical signal to the indicator by way of the transmitter. The transmitter provides the voltage to the load cell to power the strain gages. A signal voltage from the load cell is returned to the transmitter where it is converted to a digital signal before being sent to the PNT 2100 indicator through the two-wire cable.
No more Overweight Fines: The expense of operating overloaded is already prohibitive in many regions and is becoming a serious issue nationwide. Enforcement is increasing and penalties are becoming more costly.
Eliminate Legal Liabilities: The potential costs to a hauler from lawsuits resulting from an accident involving an overloaded truck can be severe.
Ensure Operating Safety: Overloaded trucks have significantly impaired braking distances and cornering abilities, and are more likely to experience premature failures of truck components.
Cut Maintenance Costs: Hauling legal payloads reduces maintenance expense on springs, brakes and tires, and increases the operating lifetime of the truck and body.
Increase Driver Efficiency: Our on-board scales give your drivers the assurance of hauling legal. With scales, drivers finish routes more efficiently and faster with full, legal loads.
Model Description Notice Price
PNT-Long-Logger-72100
(1) 2100 PNT 2100 Indicator (2) 8705 9700 Accu-link - 2 lead, 4 pin (1) 216-35 2 Conductor, 16 AWG, 35' cable (1) 216-80 2 Conductor, 16 AWG, 80' cable (1) 218-15 2 Conductor, 18 AWG, 15' cable,(4) 532623 26" Full twist compensation load cell (4) 2050 Mounting Kits
This item is non-refundable. $4,707.00
PNT-Long-Logger- 79702

(1) 9700 PNT 9700 Accu Weight Indicator (2) 7042 9700 Accu-link - 2 lead, 4 pin (1) 216-35 2 Conductor, 16 AWG, 35' cable (1) 216-80 2 Conductor, 16 AWG, 80' cable (1) 218-15 2 Conductor, 18 AWG, 15' cable (4) 532623 26" Full twist compensation load cell (4) 2050 Mounting Kits
This item is non-refundable. $4,827.00
PNT-Long-Logger-79700-RF (1) 9700 PNT 9700 Accu Weight Indicator (2) 7042 9700 Accu-link - 2 lead, 4 pin (1) 216-35 2 Conductor, 16 AWG, 35' cable (1) 216-80 2 Conductor, 16 AWG, 80' cable (1) 218-15 2 Conductor, 18 AWG, 15' cable (4) 532623 26" Full twist compensation load cell (4) 2050 Mounting Kits (1) 601 RF transmitter, (1) 602 RF Receiver This item is non-refundable. $5,577.00

 

Product Menu

ApexScales.com
ApexEgroup LLC Direct Line - 1-330-476-2422
We record all calls for quality assurance.
CopyRight © 1986  - Present Date
No Customer Data Stored on our Servers
Prices subject to change without notice.
 
International: ApexEgroupLLC@gmail.com
 USA: Quotes@ApexScales.com
Celebrating 35 years of Service in the Scale Industry.
Note: Because the nature of our business our products are in-line with the manufacturer's policies and are non-refundable. Scales, Installable Systems, Electronic Parts, Made to order, Configured systems are non-refundable.

Due to price increases in material/freight costs, All our Suppliers unfortunately had to increase pricing.